¡¡
 |
| ¡¡ |
| ¡¡ |
¡¡ |
| ¡¡ |
Detection Distance:
8m (Max)(22ºC)
Detection Range: 60º(H) 5º(V)
Operating Voltage: DC9V(6F22)
Switch Function: Alarm/Off/Chime |
|
ST-LX-AL1 MINI SENSOR ALARM
INSTRUCTION
This
product adopts high sensitivity detector, integrated
circuit and SMT technology; It gathers automatic,
convenient, safety and practical function; The wide
detection range is made of up and down, left and right
service field. It utilizes human motion infrared rays as
control signals, when human enter detection fields, it
will start the sound system (dingdong, alarm) to call
attention that person enters detection fields; It could
protect you all-weather and it will give safety you
never have for your family and travel ; Its using range
is wide and its installation is easy.
Feature:
- The shape is cabinet; Its detection range is
wide and installation is easy(It can be fastened
with screw or double-faced glue);
- It has duplex function of information (dingdong)
and alarm;
- It can be used indoor and travel, it can be
installed level or vertical and also laid on the
stable furniture.
- Its degree can be adjusted freely after
installation and the range is wide
SPECIFICATION:
Power source: DC 9V
Detection distance: 8m (max)
Detection range:60¡ã
Switch state: alarm/off/dingdong
Working temperature: -20~40¡æ |
Working humidity: <93 %RH
Detection motion speed: 0.6~1.5m/s
Static current: 0.15mA
Alarm time-delay:15s
Alarm loudness:>60db |
¡¡
Installation and usage:
Open both-sides of the support outward lightly, take
out the sensor body
Open the battery lid on the sensor, put 9v battery on
it and you could use it after 30s.
Switch function:
ALARM: It will be 10s time-delay if you turn ¡°OFF¡± to
¡°ALARM¡±, that is, it will not alarm within 10s even if
there is detection signal and it will alarm quickly when
you trigger it after 10s.
OFF:
The sensor doesn¡¯t work.
CHIME: It will be 10s time-delay if you turn ¡°OFF¡± to
¡°CHIME¡±, if you trigger it after 10s it will be 2 times
¡®dingdong¡± sound and will stop automatically.
Notes:
Please don¡¯t hit the sensor and detection windows
with hard or rough object
Please don¡¯t install the sensor in the sunlight, raining
and high humidity zone;
Please don¡¯t install the sensor near heat or air current
changed zone;
Please take out the battery in order to avoid damaging
the sensor if you don¡¯t use it for long time;
LX-AL is not formal alarm and it has limited alarm
loudness, so it can call attention to you only, but
can¡¯t guarantee absolute safety. We don¡¯t undertake any
responsibility if happen any unexpected event. |