ST-801  Wireless Home Security System

Technical Specification: Power: 12VDC(power adapter convert) Standby Power: DC12V(chargeable battery) Working Frequency: 433MHz or 315MHz Remote Control distance: >30m(open position) Static Current: 150 mA Battery group waiting time: 90Min Factory Setting: System delay: 0Sec Alert: 300Sec Dial times: 3 Vibrant ring times: 8 ¡¡

Function:
It is a user and installer-friendly, 30-zone, fully-supervised wireless control system. The system is designed to function in a way that appeals to the user but also offers features that make installers¡¯ life easier than ever before: 

EASY TO INSTALL 
¡¤ Plug-in terminal blocks can be wired while detached from the unit.
¡¤ Quick attach-detach TELCO sockets for telephone line and X-10 controller. Terminal block for telephone line & set.
¡¤ Special wall-mounted bracket permits installation without having to open the unit¡¯s cabinet.
¡¤ Optional plug-in RS-232 module for local computer.

EASY TO MAINTAIN
¡¤ Status, alarm memory and trouble data are displayed upon request.
¡¤ Diagnostic test provides visual and audible indication of the signal level of each detector.
¡¤ Remote control and status verification from distant telephones.
¡¤ Event log stores and displays information on 100 past events.
¡¤ Upload / download from distant computer via telephone line and modem.

QUICK PROGRAMMING
¡¤ Multiple-choice selection of options for each parameter.
¡¤ Unequivocal visual prompts and audible signals.
¡¤ Installer access to the user menu. A fully equipped alarm system based on the Power Max+ consists of the units shown in Figure 2 of the user¡¯s guide.
 

¡¡

Basis configuration:

¡¡